Software SET-31 ET Tolerance – Tolerance weighing function

DESCRIPTION

  • Note: the required basis is SET-01 ET OS (basic package). SET-31 is part of SET-03 Premium Industrial package with “Piece-counting function” and “Target-counting function” at a bargain price

  • The tolerance-weighing App allows rapid, simple as well as complex checkweighing procedures. For this, the user specifies a lower and an upper weight limit. Using the EasyTouch system, a range of objects can be weighed and the system indicates whether that particular weight is within the defined limits or is outside those limits. This function in many applications, including sorting, portion division as well as order picking

  • You can enter the limits very quickly in EasyTouch Tolerance using the touchscreen or by entering them in the appropriate field on the PC. The limits can be entered in two ways: either just with the lower and upper limit (absolute limit) or using a target value with an upper and lower permitted deviation . The permitted deviations can be entered either in “g” (as an absolute value) or in “%” of the target value (as a relative value)

  • Central master data memory: Checkweighing objects can be stored in the memory of the system with a target weight, as well as lower and upper limits. In this way these limits do not have to constantly be entered again, but can be easily recalled from the memory. In the master data memory you can also store a possible tare value for the typical packaging, box or container which is typically used for the object and which will then be deducted automatically from the weighing result

  • ID security: It offers the possibility of storing each weighed and stored weighing result with a unique ID number (Dynamic Object ID) and an ID name (Dynamic Object Name). Storage can be triggered either semi-automatically or fully automatically and this will always happen after the weight has been removed from the balance and then a load has been applied. This means that the user does not have to press any keys to save the weights and can work efficiently

  • Colour bar graph: Through the colour bar graph, the user is shown quickly and clearly, whether the weighing result is below, within or above the tolerance range. The red “I” result marking also shows the user where exactly the weight is within the tolerance range.

  • Full mode: In full mode, the complete weighing range of the screen is shown in colour, with the relevant colour for the tolerance weighing result. In this way the user has an even clearer indication of the relevant tolerance result

  • Batch ID: In addition for “ID security” of each individual object, a “Batch ID” can be assigned for a full test batch. This batch ID number is saved with each individual memory. In this way, you guarantee that later all stored results in the dynamic data memory can be identified with this batch ID

  • Tolerance function in pieces: It is possible to operate the checkweighing function in pieces instead of g/kg. To do this, enter the individual weight of the objects to be counted (reference weight) as well as the target quantity and the upper and lower limit quantities

  • Tolerance function in percent: It is possible to operate the checkweighing function as a percentage instead of g/kg. To do this, enter the target value as well as the upper and lower values in percent.


Technical data


  • Licensing: One license can be operated on up to four terminal devices (PC, laptop, tablet) at the same time, working independently

  • User: You can store as many users as you need in one license

  • Balances: You can store and operate as many balances as you need in one license

  • Communication balances-terminal device: The balance(s) can communicate using serial connections, USB, Bluetooth, Ethernet or WiFi with the PC, laptop or tablet

INFO HIRE PURCHASE

Financing is available using KERN hire purchase - easy and convenient.

Hire Purchase gives you the option of purchasing any product from the range against a simple monthly installment. The product value is financed over the period of the agreement. On payment of the last installment, the ownership of the contract item automatically transfers from the contractor to the contractee.

The Hire Purchase Agreement can - if you so choose - be set for a period of between one and five years. All goods paid for in rates are covered by the warranty over the complete time period of the hire purchase

Compared with buying the product, KERN hire purchase offers the advantage that the initial financial investment is largely unnecessary. This is particularly relevant when purchasing a number of products, for example when refitting a laboratory, a company department or a hospital ward. In addition the monthly installments constitute a direct cost and the item does not have to be capitalised by the purchaser.

SPARE PARTS SEARCH

this is where you can search for spare parts for devices which you are already using. Ideally you will search using the serial number, which is given on the type plated under [SN].
Alternatively you can search by item number, which is also indicated on the type plate under [REF].
When doing this please make sure that the spare part is compatible with your device, by checking the specified scope of application.

STANDARD OPTION

ALL MODELS

* All prices include the german legally applicable VAT (19 %) and do not include shipping costs
Model
Price
incl. VAT
List
price
excl.
of VAT
Payment
rate
incl. VAT
SET-31
€ 333,20
*
€ 280,00