UCI hardness tester
HO 2K

Product family: HO

Premium UCI hardness testing device for Rockwell, Brinell and Vickers

Technical Data

Test force Hardness measurement 20 N
Type of drive manual
Units HL, HV, HB, HRB, HRC, MPa, HRA
Measuring range Rockwell - scale A 61-85,6HRA
Measuring range Rockwell - scale B 41-100HRB
Measuring range Rockwell - scale C 20,3-68HRC
Measuring range Brinell 79-618HB
Measuring range tensile strength 255-2180MPa
Test object thickness [Min] 2 mm
Test object minimum weight [Min] 300 g
Memory function
Limit-setting function
Statistic function
Supplied power supply Accu & Power supply
Interfaces USB-Device
Material housing metal, lacquered
Measuring probe length 15,5 cm
Measuring probe diameter 18 mm
Test block inclusive
Product family HO
Your price
€ 5.520,00 *
*plus shipping costs (not applicable for downloads), plus VAT
Available from stock
Compare Technical data sheet Product brochure

Do you have questions?



We will be happy to consult you on our SAUTER measuring devices
Tel.: +49 7433 9933-562
info.sauter@kern-sohn.com

Standard

Calibration block
Internal memory
USB data interface
Statistics
PC software
Dimensional units
Measuring with tolerance range (function to set limits)
Rechargeable battery pack
Mains adapter
Delivery_Express_1_day

Option

Certificate_ISO_4_days

Description

  • Application: This ultrasound hardness testing device is ideally suited for mobile hardness testing, where the main emphasis is on obtaining rapid and precise results
  • Principle: The SAUTER HO measures by using a vibrating rod which vibrates at ultrasonic frequency and is pressed onto the sample at a defined test force. At the lower end there is a Vickers indenter. Its resonant frequency increases, as soon as an indentation is created when it comes into contact with the sample. Through appropriate adjustment of the device, the resulting change in resonant frequency is matched with the corresponding Vickers hardness
  • Examples: The SAUTER HO ultrasound hardness testing system is primarily used for measuring small forgings, castings, welding points, punched parts, casting tools, ball bearings and the flanks of gear wheels as well as for measuring the influence of warmth or heat
  • Advantages compared with Rockwell and Brinell: Almost non-destructive testing by smaller test force and thus only microscopic indentation craters
  • Advantages compared with Vickers: Demanding optical measuring is not required. You can therefore carry out measurements directly on-site, for example, on a permanently installed workpiece
  • Advantages compared with Leeb: The high requirements concerning the proper weight of the test object can be widely omitted
  • Standards: The device meets following technical standards: DIN 50159-1; ASTM-A1038-2005; JB/T9377-2013
  • Measurement data memory saves up to 1000 measurement groups each with 20 individual values
  • Mini statistics function: Display of the measuring result, the number of measurements, the maximum and minimum value as well as the average value and the standard deviation
  • Calibration: The device can be set to both standard hardness test blocks as well as to up to 20 reference calibration values. When doing this it is possible to measure different materials quickly, without having to re-adjust the device to the individual materials
  • Scope of delivery: Standard block for calibration (approx. 61 HRC), USB cable, display unit, UCI sensor unit, transport case, software to transfer the saved data to the PC, protective case (turquoise), further accessories

Technical Data

Test force Hardness measurement 20 N
Type of drive manual
Units HL, HV, HB, HRB, HRC, MPa, HRA
Measuring range Rockwell - scale A 61-85,6HRA
Measuring range Rockwell - scale B 41-100HRB
Measuring range Rockwell - scale C 20,3-68HRC
Measuring range Brinell 79-618HB
Measuring range tensile strength 255-2180MPa
Test object thickness [Min] 2 mm
Test object minimum weight [Min] 300 g
Memory function
Limit-setting function
Statistic function
Supplied power supply Accu & Power supply
Interfaces USB-Device
Material housing metal, lacquered
Measuring probe length 15,5 cm
Measuring probe diameter 18 mm
Test block inclusive
Product family HO

Accessories

Services

Spare part wanted?

Here you will find the right spare part for this product:

Documents

Close window