Electrical force gauge
FS 4-200

Product family: FS

Premium force gauge with integrated load cell and connection possibility for up to 4 external load cells


Measuring range force [Max] (N) 200 N
Readability force [d] (N) 0,04 N
Measuring head measuring frequency 1000 Hz
Number of platforms / channels 4
Supplied power supply Battery & Power supply
Rechargeable battery 3,7V, 2400mAh
Memory function
Statistic function
Peak function
Material housing plastic
Dimensions completely mounted (W×D×H) 71×31×180 mm
Interfaces USB-Device
Product family FS
Your price
€ 1.180,00 *
*plus shipping costs (not applicable for downloads), plus VAT
Available from stock
Compare Technical data sheet Product brochure

Do you have questions? Please get in contact +49 7433 9933-0 or info@kern-sohn.com


Peak hold function
Scan mode
Push and Pull
Internal memory
USB data interface
KERN Communication Protocol (KCP)
Measuring with tolerance range (function to set limits)
Rechargeable battery pack
Mains adapter


PC software


  • Use with integrated load cell
    The SAUTER FS premium force gauge has an load measuring cell for tensile and compressive force applications. Either mobile for rapid testing or stationary integrated into a test stand or production line, the multifunction display allows all the values recorded to be read off at a glance in real time. Via the integrated interface, the data can be sent to a PC or laptop for further processing.
  • Use with external load cells
    The SAUTER FS premium force gauge is compatible with all SAUTER strain gauge measuring cells, see Measuring Cells. Up to 4 external measuring cells can be connected simultaneously. If an external measuring channel is used, the internal load cell is deactivated as long as an external load cell is connected.
  • Measurement of forces in different tensile or compression directions possible with only one measuring device
  • 3,5" touchscreen
  • Standard version with 4 measuring channels for external force sensors
  • An internal load cell is possible (is deactivated if an external load cell is connected)
  • Suitable for 4-wire and 6-wire sensors with strain gauges
  • Two-point adjustment with weights or numerical adjustment possible
  • The specific data of an external sensor are stored directly in the connector
  • USB interface for data transfer and power supply as standard
  • Internal device memory (16 GB)
  • Adjustable SI units: kg, N, kN, mN, MN, Nm, kNm, mNm
  • Tolerance function
  • Track function for continuous measurement display
  • Peak value measurement
  • Mountable on all SAUTER test stands
  • Supplied in a high-quality and robust system case (systainer® T-LOC) including plug-in power supply and USB cable type C
  • Tip: Order the practical system case (systainer® T-LOC) for storing and transporting of accessories, clamps, sensors, etc. at the same time, SAUTER FS TKZ, see accessories


Close window


Spare part wanted?

Here you will find the right spare part for this product: