Minimise window
no item selected

Drive-through scale NFB Drive-through scale (IP67) with XXL display device and EC type approval [M]

Your KERN product specialist will be happy to help
Florian Bächle
Florian Bächle
Area Sales Manager 
Denmark, Sweden, Finland, Norway, Poland, Lithuania, Latvia, Estonia
Tel.: +49 7433 9933-118
Fax: +49 7433 9933-29118
Mobil: +49 151 446 11168
florian.baechle@kern-sohn.com

DESCRIPTION

  • Drive-through scale for rapid weighing of e.g. wire cage trolleys, shelf trolleys, container trolleys, storage trolleys, sack trucks, transport cases, transpallets, mobile containers, containers refuse etc.
  • Low platform height and integrated access ramps on both sides facilitate access.
  • Weighing bridge: anti-slip corrugated steel plate, lacquered, protection against dust and water splashes IP67, 4 silicone-coated steel load cells. Also available as component without the display device, KERN KFD-V20
  • Display device KERN KFB-TM
  • Protective working cover included with delivery
  • Did you know? Our floor scales are delivered in a robust wooden box. This protects the high-quality weighing technology from environmental influences and stresses during transportation. KERN – always one step ahead

Note: For verified scales the weighing bridge must be fixed to the floor. Optionally, with an access ramp, a footplate pair or a pit frame
Shipment via freight forwarder. Please ask for dimensions, gross weight, shipping costs

ACCESSORIES

• Protective working cover, scope of delivery: 5 items KFB-A02S05 € 47,60 *
• Stand to elevate display device, height-adjustable (750–1000 mm), must be ordered at purchase YKP-02 € 226,10 *
• Stand to elevate display device, height of stand approx. 750 mm BFS-A07 € 142,80 *
• Pair of base plates to fix the weighing bridge to the floor BFS-A06N € 83,30 *
• Matrix needle printer for KERN-Balances with Data interface RS-232 911-013 € 464,10 *
• Colour band for printer 911-013-001 € 13,09 *
• Paper rolls for Printer KERN 911-013, width 57 mm (10 pieces) 911-013-010 € 41,65 *
• Thermal printer for KERN-Balances with Data interface RS-232 YKB-01N € 380,80 *
• Thermal receipt rolls for Printer KERN YKB-01N (10 pieces) YKB-A10 € 65,45 *
• Statistics printer for KERN-Balances with Data interface RS-232 YKS-01 € 464,10 *
• Rechargeable battery pack internal, operating time up to 35 h, charging time approx. 10 h, must be ordered at purchase KFB-A01 € 41,65 *
• Large display with superior display size, digit height 3'' (76 mm) - only in combination with KERN KFN-A01 YKD-A02 € 255,85 *
• Y cable for parallel connection of two terminal devices to the RS-232 interface on the scale, e.g. signal lamp and printer CFS-A04 € 41,65 *
• RS-232/Ethernet adapter to connect force-measuring instruments to an IP-based Ethernet network YKI-01 € 345,10 *
• RS-232/Bluetooth adapter: Adapter for the wireless connection of balances, force measuring devices etc. to an RS-232 interface to Bluetooth devices, such as Bluetooth printers (e. g. KERN YKC-01), tablets, laptops, Smartphones etc. YKI-02 € 261,80 *
• RS-232/WiFi adapte: High-quality adapter for the wireless connection of balances, force measuring devices etc. to an RS-232 interface to WLAN-enabled devices, such as tablets, laptops, Smartphones etc. YKI-03 € 821,10 *
• Mains adapter external YKA-11 € 49,98 *
• Analogue module 0–10 V, must be ordered at purchase, not in combination with signal lamp KFB-A04 € 113,05 *
• Analogue module 4–20 mA, must be ordered at purchase, not in combination with signal lamp KFB-A05 € 113,05 *

INFO HIRE PURCHASE

Financing is available using KERN hire purchase - easy and convenient.

Hire Purchase gives you the option of purchasing any product from the range against a simple monthly installment. The product value is financed over the period of the agreement. On payment of the last installment, the ownership of the contract item automatically transfers from the contractor to the contractee.

The Hire Purchase Agreement can - if you so choose - be set for a period of between one and five years. All goods paid for in rates are covered by the warranty over the complete time period of the hire purchase

Compared with buying the product, KERN hire purchase offers the advantage that the initial financial investment is largely unnecessary. This is particularly relevant when purchasing a number of products, for example when refitting a laboratory, a company department or a hospital ward. In addition the monthly installments constitute a direct cost and the item does not have to be capitalised by the purchaser.

SPARE PARTS SEARCH

this is where you can search for spare parts for devices which you are already using. Ideally you will search using the serial number, which is given on the type plated under [SN].
Alternatively you can search by item number, which is also indicated on the type plate under [REF].
When doing this please make sure that the spare part is compatible with your device, by checking the specified scope of application.

STANDARD OPTION FACTORY
Adjusting program (CAL): For quick setting of the balance's accuracy. External adjusting weight required.
Data interface RS-232: To connect the balance to a printer, PC or network
Piece counting: Reference quantities selectable. Display can be switched from piece to weight.
Totalising level A: The weights of similar items can be added together and the total can be printed out.
Weighing with tolerance range: Upper and lower limiting can be programmed individually, e. g. sorting and portioning.
Vibration-free weighing: (Animal weighing program) Vibrations are filtered out so that a stable weight is obtained.
IP 67 protection in accordance with DIN EN 60529:
Designed for temporary use in wet areas. Can be cleaned with water jet. Temporary submersion is possible. Dustproof.
Universal mains adapter: with universal input and optional input socket adapters for EU, GB
Strain gauge: An electrical resistor strip that is glued to an elastic deforming body made of aluminium. As the strain gauge is mechanically deformed its resistance value changes, allowing
Pallet shipment via freight forwarder.
Ready for dispatch in 2 days
DAkkS calibration possible. The time required for DAkkS calibration is specified in the pictogram.
Bluetooth data interface: To transfer data from the balance to a printer, PC or other peripherals.
Rechargeable battery pack: rechargeable set
Verification possible. The time required for verification is specified in the pictogram.

ALL MODELS

* All prices include the german legally applicable VAT (19 %) and do not include shipping costs
Model
Weighing
capacity
[Max]
kg
Readability

[d]
g
Verific.
value
[e]
g
Minimum
load
[Min]
g
Option
Verification
Option
DAkkS
Calibration
Certificate
Price
incl. VAT
List
price
excl.
of VAT
Payment
rate
incl. VAT
NFB 600K200M
600
200
200
4000
1
1
€ 1.618,40
*
€ 1.360,00
Available from stock Available within 4 days Available within 7 days Unfortunately not available at this time! Unfortunately the delivery status is not available at the moment. Please try again later. Expected to be available again on
NFB 600K200LM
600
200
200
4000
1
1
€ 1.892,10
*
€ 1.590,00
Available from stock Available within 4 days Available within 7 days Unfortunately not available at this time! Unfortunately the delivery status is not available at the moment. Please try again later. Expected to be available again on
NFB 1.5T0.5M
1500
500
500
10000
1
1
€ 1.618,40
*
€ 1.360,00
Available from stock Available within 4 days Available within 7 days Unfortunately not available at this time! Unfortunately the delivery status is not available at the moment. Please try again later. Expected to be available again on
NFB 1.5T0.5LM
1500
500
500
10000
1
1
€ 1.892,10
*
€ 1.590,00
Available from stock Available within 4 days Available within 7 days Unfortunately not available at this time! Unfortunately the delivery status is not available at the moment. Please try again later. Expected to be available again on
Note: For applications that require verification, please order verification at the same time, initial verification at a later date is not possible. Verification at the factory, we need to know the full address of the location of use.