Minimise window
no item selected

Ultrasound hardness testing device HO Premium UCI hardness testing device for Rockwell, Brinell and Vickers

DESCRIPTION

  • Application: This ultrasound hardness testing device is ideally suited for mobile hardness testing, where the main emphasis is on obtaining rapid and precise results
  • The SAUTER HO measures by using a vibrating rod which vibrates at ultrasonic frequency and is pressed onto the sample at a defined test force. At the lower end there is a Vickers indenter. Its resonant frequency increases as soon as an indentation is created when it comes into contact with the sample. Through appropriate adjustment of the device, the resulting change in resonant frequency is matched with the corresponding Vickers hardness
  • Examples: The HO ultrasound hardness testing system is primarily used for measuring small forgings, castings, welding points, punched parts, casting tools, ball bearings and the flanks of gear wheels as well as for measuring the influence of warmth or heat
  • Advantages compared with Rockwell and Brinell: Less test force and therefore only microscopic, small penetrations means that the testing is less destructive
  • Advantages compared with Vickers: Demanding optical measuring is not required. You can therefore carry out measurements directly on-site, for example, on a permanently installed workpiece
  • Advantages compared with Leeb: The high requirements for the weight of the test object are no longer required, in most cases
  • Standards: The device fulfils these technical standards: DIN 50159-1-2008; ASTMA1038-2005; JB/T9377-2013
  • Measurement data memory saves up to 1000 measurement groups each with 20 individual values
  • Mini statistics function: Display of the measuring result, the number of measurements, the maximum and minimum value as well as the average value and the standard deviation
  • The device can be set to both standard hardness test blocks and also to up to 20 reference calibration values. When doing this it is possible to measure different materials quickly, without having to re-adjust the device to the individual materials
  • Scope of supplies: Display unit, UCI sensor unit, transport case, software to transfer the saved data to the PC, accessories

ACCESSORIES

• External impact sensor Type D AHMO D € 394,40 *
• Supporting ring, flat HO-A04 € 533,60 *
• Supporting ring, small cylinder HO-A05 € 522,00 *
• Supporting ring, large cylinder HO-A06 € 522,00 *
• Deep-hole protective cover HO-A07 € 272,60 *
• Calibration and adjustment plate (hardness test blocks) with defined and tested steel hardness for regular testing and adjustment of hardness testing devices. 28–35 HRC HO-A09 € 458,20 *
• Calibration and adjustment plate (hardness test blocks) with defined and tested steel hardness for regular testing and adjustment of hardness testing devices. 38–43 HRC HO-A10 € 458,20 *
• Calibration and adjustment plate (hardness test blocks) with defined and tested steel hardness for regular testing and adjustment of hardness testing devices. 48–53 HRC HO-A11 € 458,20 *
• Calibration and adjustment plate (hardness test blocks) with defined and tested steel hardness for regular testing and adjustment of hardness testing devices. 58–63 HRC HO-A12 € 458,20 *
• Test bench for repeatable movements during testing. Stroke length 34 mm. Maximum height of the test object 240 mm HO-A08 € 1.728,40 *
• UCI-Sonde for HV 1 HO-A01 € 4.524,00 *
• UCI-Sonde for HV 2 HO-A02 € 4.524,00 *
• Transport case MPS-A09 € 133,40 *
• UCI-Sonde for HV 5 HO-A13 € 4.524,00 *
• UCI-Sonde for HV 10 HO-A14 € 4.524,00 *
• Motorisierte UCI-Sonde for HV 0,3 HO-A15 € 8.004,00 *
• Motorisierte UCI-Sonde for HV 0,5 HO-A16 € 8.004,00 *
• Motorisierte UCI-Sonde for HV 0,8 HO-A17 € 8.004,00 *
• Motorisierte UCI-Sonde for HV 1 HO-A18 € 8.004,00 *
• Transport case HO-A21 € 533,60 *
• Test bench for round, flat objects for use with these motorised probes: HO-A15 to -A18 HO-A19 € 2.204,00 *
• connection cable HO-A20 € 278,40 *

INFO HIRE PURCHASE

Financing is available using KERN hire purchase - easy and convenient.

Hire Purchase gives you the option of purchasing any product from the range against a simple monthly installment. The product value is financed over the period of the agreement. On payment of the last installment, the ownership of the contract item automatically transfers from the contractor to the contractee.

The Hire Purchase Agreement can - if you so choose - be set for a period of between one and five years. All goods paid for in rates are covered by the warranty over the complete time period of the hire purchase

Compared with buying the product, KERN hire purchase offers the advantage that the initial financial investment is largely unnecessary. This is particularly relevant when purchasing a number of products, for example when refitting a laboratory, a company department or a hospital ward. In addition the monthly installments constitute a direct cost and the item does not have to be capitalised by the purchaser.

SPARE PARTS SEARCH

this is where you can search for spare parts for devices which you are already using. Ideally you will search using the serial number, which is given on the type plated under [SN].
Alternatively you can search by item number, which is also indicated on the type plate under [REF].
When doing this please make sure that the spare part is compatible with your device, by checking the specified scope of application.

STANDARD OPTION
Memory: Balance contains memories, e.g. for  tare weights, weighing data, item data,  PLU etc.
USB data interface: To connect the balance to a printer, PC or other peripherals.
PC software: to transfer the measurements from the device to a PC.
Weighing units: Can be switched to e.g. nonmetric units at the touch of a key. See balance model.
Weighing with tolerance range: Upper and lower limiting can be programmed individually, e. g. sorting and portioning.
Rechargeable battery pack: rechargeable set
Battery operation: The battery type is specified for each device.
Parcel shipment via courier. Ready for dispatch in 1 day
ISO calibration possible. The time required for ISO calibration is specified in the pictogram.

ALL MODELS

* All prices include the german legally applicable VAT (16 %) and do not include shipping costs
Model
Hardness
scale
Minimum
weight
Test item
g
Minimum
thickness
Test object
mm
Oberflächen-
rauheit
des
Prüfkörpers
Option
Factory
calibration
certificate
Price
incl. VAT
List
price
excl.
of VAT
Payment
rate
incl. VAT
HO 1K
HV 1
300
2
RA < 3,2 µm
1
€ 5.220,00
*
€ 4.500,00
Available from stock Available within 4 days Available within 7 days Unfortunately not available at this time! Unfortunately the delivery status is not available at the moment. Please try again later. Expected to be available again on
HO 2K
HV 2
300
2
RA < 5 µm
1
€ 5.220,00
*
€ 4.500,00
Available from stock Available within 4 days Available within 7 days Unfortunately not available at this time! Unfortunately the delivery status is not available at the moment. Please try again later. Expected to be available again on
HO 5K
HV 5
300
2
RA < 10 µm
1
€ 5.220,00
*
€ 4.500,00
Available from stock Available within 4 days Available within 7 days Unfortunately not available at this time! Unfortunately the delivery status is not available at the moment. Please try again later. Expected to be available again on
HO 10K
HV 10
300
2
RA < 15 µm
1
€ 5.220,00
*
€ 4.500,00
Available from stock Available within 4 days Available within 7 days Unfortunately not available at this time! Unfortunately the delivery status is not available at the moment. Please try again later. Expected to be available again on