Minimise window
no item selected

Digital force gauge FH-S Universal digital force gauges for tension and compression tests with integrated measuring cell and RS-232 data interface

DESCRIPTION

  • Turnable display with backlight
  • Can be mounted on all SAUTER test stands
  • Data interface RS-232, included
  • Standard attachments: as shown below, extension rod: 90 mm
  • Delivered in a hard carrying case
  • Selectable measuring units: N, lb, kg
  • Real time or Peak Hold Mode to observe transcients or capture peaks
  • Measuring with tolerance range (limit-setting function): Upper and lower limiting can be programmed, in pull and push direction. The process is supported by an acoustic and visual signal
  • Auto-Power-Off
  • Internal memory for up to 10 measurements
  • Mini Statistics Kit: calculates the average result from up to ten stored single results, min., max., n

ACCESSORIES

• Control module with integrated relays. For example for machine control (I/O) AFH-02 € 394,40 *
• Force-time evaluation software, data transmission rate 20 Hz AFH FAST € 133,40 *
• Force-distance data transfer software with graphical representation of the measuring process,only in combination with SAUTER LD) AFH LD € 290,00 *
• Force-distance evaluation software with graphic display of the measuring process (only in combination with SAUTER LD) AFH FD € 754,00 *
• Pin vice for tension and fracture tests to 500 N (e.g. for cable tests), 2 pieces AC 01 € 121,80 *
• Ball shaped head for pressure and fracture tests to 5 kN (e.g. foam, glass), 2 pieces AC 02 € 63,80 *
• Thin film grip attachment for tension tests to 5 kN AC 03 € 133,40 *
• Pressure disc for compression tests to 5 kN AC 08 € 63,80 *
• Grip clamp for put in and pull out tests to 5 kN, 2 pieces AC 09 € 98,60 *
• Rolling clamp for tension and fracture tests to 5 kN, 2 pieces AC 11 € 80,04 *
• Parallel jaw grip for tension and fracture tests to 5 kN, 2 pieces AC 12 € 90,48 *
• 1-jaw-clamp for tension and fracture tests to 5 kN, 2 pieces AC 13 € 90,48 *
• Fine point clamp for tension and fracture tests to 500 N, 2 pieces AC 14 € 63,80 *
• Heavy duty clamp for tension and fracture tests to 5 kN, 2 pieces AC 16 € 145,00 *
• Long clamp for tension and fracture tests to 50 N, 2 pieces AC 17 € 139,20 *
• 2 jaw grip for tension tests to 5 kN, 2 pieces AC 18 € 145,00 *
• Wide clamp with quick-release mechanism for tension and fracture tests to 500 N AC 22 € 139,20 *
• Quick clamps for high capacity tensile tests to 30 kN, opening max. 8 mm, 1 piece AC 38 € 1.171,60 *
• Eccentric roll clamps for cable tests to 5 kN, opening max. 9 mm, 1 piece AC 41 € 226,20 *
• Drum clamps for cable connector extraction tests to 5 kN, for test objects with Ø 1,5 mm - 8 mm, 1 piece AC 42 € 226,20 *
• Standard attachments for Force gauges 10 - 500 N, 6 items (M6-Thread) AC 43 € 52,20 *
• Concave force sensor with optimised radius for measurement, particularly of arms and legs to 1000 N, 1 piece AC 45 € 156,60 *
• Flat square-shaped sensor for lateral power sensing of back, chest or arm to 1000 N, 1 piece AC 46 € 104,40 *
• Round sensor to measure particular muscle groups, such as, for example, the shoulder to 1000 N, 1 piece AC 47 € 110,20 *
• Stainless steel handle bar with rubber grip for safe handling, 1 piece AFH 04 € 110,20 *
• Pressure disc, Ø 110 mm, 1 piece AFH 06 € 127,60 *
• RS-232/USB adapter to connect force-measuring instruments with USB connector AFH 12 € 98,60 *
• Transport case MPS-A09 € 133,40 *
• Farbband für Drucker KERN YKN-01 YKN-A02 € 34,80 *
• Mains adapter for YKN YKA-08 € 42,92 *
• Matrix needle printer YKN-01 € 266,80 *
• Thermal receipt rolls for Printer KERN YKB-01N (10 pieces) YKB-A10 € 63,80 *
• Thermal printer for KERN-Balances with Data interface RS-232 YKB-01N € 359,60 *
• Statistics printer for KERN-Balances with Data interface RS-232 YKS-01 € 452,40 *
• Roll of labels for KERN YKE-01, 73×61 mm, 100 labels YKE-A02 € 34,80 *
• Label printer for printing weights on thermal labels, ASCII-capable YKE-01 € 684,40 *
• Roll of labels for KERN YKE-01, 105×148 mm, 45 labels YKE-A03 € 34,80 *
• M10 External thread, M6 Threaded hole AFM 05 € 0,00 *
• M10 External thread, M6 Threaded hole AFM 07 € 17,40 *
• M6 Threaded hole, M5 External thread AFM 102 € 17,40 *
• M12 Threaded hole, M6 Threaded hole AFM 15 € 17,40 *

INFO HIRE PURCHASE

Financing is available using KERN hire purchase - easy and convenient.

Hire Purchase gives you the option of purchasing any product from the range against a simple monthly installment. The product value is financed over the period of the agreement. On payment of the last installment, the ownership of the contract item automatically transfers from the contractor to the contractee.

The Hire Purchase Agreement can - if you so choose - be set for a period of between one and five years. All goods paid for in rates are covered by the warranty over the complete time period of the hire purchase

Compared with buying the product, KERN hire purchase offers the advantage that the initial financial investment is largely unnecessary. This is particularly relevant when purchasing a number of products, for example when refitting a laboratory, a company department or a hospital ward. In addition the monthly installments constitute a direct cost and the item does not have to be capitalised by the purchaser.

SPARE PARTS SEARCH

this is where you can search for spare parts for devices which you are already using. Ideally you will search using the serial number, which is given on the type plated under [SN].
Alternatively you can search by item number, which is also indicated on the type plate under [REF].
When doing this please make sure that the spare part is compatible with your device, by checking the specified scope of application.

STANDARD OPTION
Peak hold function: capturing a peak value within a measuring process.
Push and Pull: the measuring device can capture tension and compression forces.
Memory: Balance contains memories, e.g. for  tare weights, weighing data, item data,  PLU etc.
Data interface RS-232: To connect the balance to a printer, PC or network
Statistics: using the saved values, the device calculates statistical data, such as average value, standard deviation etc.
Weighing with tolerance range: Upper and lower limiting can be programmed individually, e. g. sorting and portioning.
Rechargeable battery pack: rechargeable set
Mains adapter: 230V/50Hz in standard version for Germany. On request GB or USA version.
Parcel shipment via courier. Ready for dispatch in 1 day
2 years warranty
Control outputs (optocoupler, digital I/O) to connect relays, signal lamps, valves etc.
PC software: to transfer the measurements from the device to a PC.
ISO calibration possible. The time required for ISO calibration is specified in the pictogram.

ALL MODELS

* All prices include the german legally applicable VAT (16 %) and do not include shipping costs
Model
Measuring
capacity
[Max]
N
Read-
ability
[d]
N
Option
DAkkS
Calibration
Certificate
(Tension)
Option
DAkkS
Calibration
Certificate
(Compression)
Option
DAkkS Calibration
Certificate
(Tension +
Co
Option
Factory
calibration
certificate (Tension)
Option
Factory
calibration
certificate (Compressio
Option
Factory calibration
certificate (Tension +
Price
incl. VAT
List
price
excl.
of VAT
Payment
rate
incl. VAT
FH 2.
2
0,001
0
0
0
1
1
1
€ 533,60
*
€ 460,00
Available from stock Available within 4 days Available within 7 days Unfortunately not available at this time! Unfortunately the delivery status is not available at the moment. Please try again later. Expected to be available again on
FH 5.
5
0,001
0
0
0
1
1
1
€ 533,60
*
€ 460,00
Available from stock Available within 4 days Available within 7 days Unfortunately not available at this time! Unfortunately the delivery status is not available at the moment. Please try again later. Expected to be available again on
FH 10.
10
0,005
1
1
1
1
1
1
€ 533,60
*
€ 460,00
Available from stock Available within 4 days Available within 7 days Unfortunately not available at this time! Unfortunately the delivery status is not available at the moment. Please try again later. Expected to be available again on
FH 20.
20
0,01
1
1
1
1
1
1
€ 533,60
*
€ 460,00
Available from stock Available within 4 days Available within 7 days Unfortunately not available at this time! Unfortunately the delivery status is not available at the moment. Please try again later. Expected to be available again on
FH 50.
50
0,01
1
1
1
1
1
1
€ 533,60
*
€ 460,00
Available from stock Available within 4 days Available within 7 days Unfortunately not available at this time! Unfortunately the delivery status is not available at the moment. Please try again later. Expected to be available again on
FH 100.
100
0,05
1
1
1
1
1
1
€ 533,60
*
€ 460,00
Available from stock Available within 4 days Available within 7 days Unfortunately not available at this time! Unfortunately the delivery status is not available at the moment. Please try again later. Expected to be available again on
FH 200.
200
0,1
1
1
1
1
1
1
€ 533,60
*
€ 460,00
Available from stock Available within 4 days Available within 7 days Unfortunately not available at this time! Unfortunately the delivery status is not available at the moment. Please try again later. Expected to be available again on
FH 500.
500
0,1
1
1
1
1
1
1
€ 533,60
*
€ 460,00
Available from stock Available within 4 days Available within 7 days Unfortunately not available at this time! Unfortunately the delivery status is not available at the moment. Please try again later. Expected to be available again on
500
0,1
1
1
1
1
1
1
€ 719,20
*
€ 620,00
Available from stock Available within 4 days Available within 7 days Unfortunately not available at this time! Unfortunately the delivery status is not available at the moment. Please try again later. Expected to be available again on