GTC

Contact

Orderlist

573 Precision balance

All-rounder e.g. as laboratory, counting or checking balance, with EC-Type Approval [M]

DKD certificate, delivery time + 3 working days

Verification possible, for all models where verification is possible, Delivery time +7 days

Description:

Note: For applications that require verification, please order verification at the same time, initial verification at a later date is not possible.
Verification at the factory, we need to know the full address of the location of use.
User guidance step by step in the display
Precise counting: The automatic reference optimization gradually improves the average value of the piece weighing
Numerical tare deduction for container weighing. Useful when checking loads
Protective working cover over keyboard and housing. Can be reordered at any time, s. accessories
Oci�n: echargeable battery pack external, approx. 50 h operating time , approx. 10 h charging time, KERN KS-A01, s. accessories

Standard:

Adjusting program (CAL): For quick setting of the balance's accuracy. External adjusting weight required.

Piece counting: Reference quantities selectable. Display can be switched from piece to weight.

Data interface: RS 232 C, bidirectional, for connection of printer and PC.

GLP/ISO record keeping of weighing data with date, time and identifi cation-no. Only with printers from KERN.

Net-total weighing: weight of tare cup and weight of components memorized in two separate stores.

Percentage determination: Displays the deviation from the reference weight (100%) in % instead of grammes.

Underfloor weighing: load support with hook on the underside of the balance.

Mains adapter: 230V/50Hz in standard version for Germany. On request GB or USA version.

The prices do not include legal VAT or shipping.

Model KERN 573-34NM

(Prices without VAT for Germany)

Readout d

0,01 g

Price 573-34NM

470,00 €

Measuring range Max

650 g

Quantity

Min. piece weight at counting

10 mg

Weighing plate (�/WxD)

15 cm

Verification value e

100 mg

DKD certificate
963-127

65,00 €

Minimum load Min

500 mg

Verification
950-116

60,00 €

Reproducibility

0,01 g

ISO Calibration Certificate

Linearity

� 0,02 g

Accessories

Documents

Technical Datasheet

Model KERN 573-46NM

(Prices without VAT for Germany)

Readout d

0,1 g

Price 573-46NM

470,00 €

Measuring range Max

6500 g

Quantity

Min. piece weight at counting

100 mg

Weighing plate (�/WxD)

160x200 mm

Verification value e

1 g

DKD certificate
963-128

80,00 €

Minimum load Min

5 g

Verification
950-117

70,00 €

Reproducibility

0,1 g

ISO Calibration Certificate

Linearity

� 0,2 g

Accessories

Documents

Technical Datasheet

Model KERN 573-56NM

(Prices without VAT for Germany)

Readout d

0,1 g

Price 573-56NM

510,00 €

Measuring range Max

20000 g

Quantity

Min. piece weight at counting

100 mg

Weighing plate (�/WxD)

160x200 mm

Verification value e

1 g

DKD certificate
963-128

80,00 €

Minimum load Min

5 g

Verification

verification not available

Reproducibility

0,1 g

ISO Calibration Certificate

Linearity

� 0,3 g

Accessories

Documents

Technical Datasheet

Accessories for KERN 573 Precision balance

Model KERN	Description	Price without VAT €	Quantity
YKS-01	Statistics printer GLP record keeping (with date and time) Documents	390,00
YKB-A10	Paper rolls for printer KERN YKB-01N, YKS-01 Length 23 m, diameter 40 mm 10 pieces Documents	35,00
904-101	Underfloor weighing board Documents	310,00
KS-A01	Rechargeable battery pack, external for series 572, DS, KB, FKB, FKT, IKT Documents	170,00
572-A02	Protective working cover over keyboard and housing for series 572, 573 Documents	25,00
572-926	Interface cable for RS 232, length approx. 1,5 m 57�, CDS, CKE, DS, FKB, FKT, KB, IKT, PL�-A, PL�-F Documents	46,00
YPS-02	Universal carrying case for scales strain gauge Interior measurements WxDxH 520x320x95 mm Documents	145,00

Special offers

Here you can find scales with little signs of usage - low priced and always up to date!

Exhibitions 2012

Exhibitions 2012

Operating instructions

Here you can find the operating instruction for your balance�

DKD calibration laboratory

Detailed information on topics pertaining to the calibration of balances, test weights, and force measuring devices

	Basic scales \| Pocket balances \| School balances \| Laboratory balances \| Precision balances \| Analytical balances \| Moisture analyzers \| Industrial scales \| Bench scales \| Platform scales \| Floor scales \| Mobile scales \| Counting scales \| Counting systems \| Price computing scales \| Hanging scales / crane scales \| Display devices \| Platforms \| Medical scales \| Baby scales \| Personal scales \| Fitness scales \| Personal scales \| Body fat scales \| Handrail scales \| Adiposity scales \| Wheelchair platform scales \| Chair scales \| Height rods \| Hand grip dynamometers \| Test weights \| OIML E1 \| OIML E2 \| OIML F1 \| KERN F1 \| OIML F2 \| OIML M1 \| OIML M2 \| OIML M3 \| Force measurement \| Mechanical force gauges \| Digital force gauges \| Test stands \| Horizontal test stands \| Vertical test stands \| Spring testers \| Torque \| Digital torque devices \| Coating thickness \| Digital coating thickness gauges \| Material thickness \| Digital material thickness gauges \| Hardness testing \| Leeb hardness testing \| Shore hardness testing \| Stroboscopes \| Digital strobsocops \| Length measurement \| Digital length measuring devices \| Environment \| Sound level measurement \| Light measurement \| Temperature measurement \| Software \| Balance Connection \| Printout Configurator \| Software for force measurement \| Special devices \| Spring balances \| Dynamometer \| Tomb stone tester \| Tension testing instrument \| Precious stone testing \| Scales with signs of usage \| Accessories \| Accessory balances \| Accessory test weights \| Accessory software \| \| Special offers \| Service & Support \| Repair service \| Calibration \| Verification \| Download center
	© 2009 Kern & Sohn GmbH \| Webdesign Heindl Internet AG